1 QT. ASPHALASTIC CRACK FILLER

Just Clean,
Sweep & Fill:

Latex-ite Asphalastic Crack Filler

Latex·ite 1 QT. Asphalastic™ Crack Filler
is a specially formulated Acrylic Latex Rubber ... Vinyl Polymer Blend that provides extended life & greater durability than ordinary cold pour formula crack fillers. For blacktop cracks up to 3/8" wide.

Premium filler for cracks up to 3/8" wide.
Fortified with latex and asphalt binders to strengthen bond.
Just clean crack, shake, snip open and squeeze into crack.
Low VOC Formula / Easy soap & water clean-up.

MSDS DATA SHEET

Application:

Latex·ite Asphalastic™ Crack Filler is easy to use. Remove all dirt, grass, old crack filler and debris from crack to be filled. Shake well before using. Pre-mixed, DO NOT DILUTE.

Cut tip to a size slightly smaller than the width of the crack to be repaired. Squeeze/pour crack filler DIRECTLY INTO CRACK.... DO NOT OVERFILL AS IT WILL TRACK. Wipe/clean any crack filler residue from crack surface. Do not apply more than 1/4" thick in any single application.

For deep/large cracks we recommend using Latex·ite Trowel Patch. Or you may fill larger cracks with sand or backer rod to within 1/4" of the surface before applying Asphalastic™ Crack Filler. Asphalastic™ will dry to the touch within 30 minutes and depending on outdoor conditions, should be fully dry within 4-8 hours.

Caution: Do not allow product to freeze. Apply when temperature is at least 55 degrees Fahrenheit and rising. Do not apply if rain is forecast for 24 hours. Do not apply in cracks wider than 1/2". Fresh crack filler will clean up with soap and water.

Asphalastic™ Crack Filler Video

Return to Products Main Page