Latex·ite Premium 2X™ Crack Filler is easy to use. Remove all dirt, grass, old crack filler and debris from crack to be filled. Shake well before using. Pre-mixed, DO NOT DILUTE.
Cut tip to a size slightly smaller than the width of the crack to be repaired. Squeeze/pour crack filler SLOWLY into crack overfilling slightly to allow for shrinkage. The filler will self-level. Wipe clean any crack filler residue from crack surface. (If you leave any on the outside of the crack it will track on a hot day!). Do not apply more than 1/4" thick in any single application. If you have larger cracks you may first clean them, then fill with a backer rod to within 1/4" of surface before applying 2X™. 2X™ will dry to the touch within 30 minutes and depending on weather, should be fully dry within 4-8 hours and ready to seal over. Use when outdoor and surface temp is 55 degrees F or higher and if no rain is forecast within 24 hours. Cleans up with soap and water.
Do not allow to freeze. Keep out of reach of children. Not flammable. Keep cap on when not in use.
For deep/large cracks we recommend using Latex·ite Trowel Patch. Or you may fill larger cracks with sand or backer rod to within 1/4" of the surface before applying 2X™ Crack Filler. 2X™ will dry to the touch within 30 minutes and depending on outdoor conditions, should be fully dry within 4-8 hours.
Caution: Do not allow product to freeze. Apply when temperature is at least 55 degrees Fahrenheit and rising. Do not apply if rain is forecast for 24 hours. Do not apply in cracks wider than 1/2". Fresh crack filler will clean up with soap and water.
